Review by Markus Stamm, published March 2013

Introduction

The lenses are designed for full frame cameras, but can of course be used on DX DSLRs, too. In this review we'll have a look at how the 24mm lens performs on our current DX test camera, the Nikon D7000, where it is the equivalent of roughly a 35mm f/2.8 lens. That's a classic wide angle focal length, often used for press work or street photography, for example.

Due to the similarities of the lenses, the three reviews share large portions of text.

The lens belongs to the high end line of Sigma lenses (EX) and, from the mount to the focus ring, the build quality is actually on a high level. However, the frontmost part that holds the inner lens tube wobbles quite a bit.

The broad focus ring works as a clutch to switch between AF and MF mode. When pulled towards the camera, the lens can be focused manually, while the AF still works as long as the camera remains in AF mode. This way the lens allows for FTM (full time manual focusing), a feature usually only available on Nikon AF-S or Sigma HSM lenses with ultrasonic wave drives.

Typical for many Sigma lenses the focus ring of the EX 24 rotates in "Canon" style, which is the exact opposite of how these rings work on Nikkor lenses. If you're used to the Nikon way of focusing, the Sigma lens may be a challenge for your muscle memory. In addition, you'll have to remember that the focus assist in the viewfinder assumes a Nikon lens and consequently suggests the wrong direction of focus ring movement.

As can be seen in the product shots below, the lens extends a bit when focusing towards closer distance. The front element does not rotate, so using a polarizer is easily possible.

Our review unit still featured the old crinkle finish that was typical for Sigma EX lenses for many years. However, Sigma changed the outer finish to a smoother one for the whole portfolio. You can have a look at our review of the Sigma EX 28/1.8 to get an impression of what the current finish looks like. If you purchase the EX 24 new today, it will also feature this smoother finish, unless it has been sitting on the store's shelf for a few years already.

The lens has no built-in AF motor and relies on a drive screw operated by the camera (which makes it incompatible with entry-level DX cameras that no longer feature this screw drive). Thanks to a rather short focus path the AF works quite fast.